21 gram BLACK cyanoacrylate glue.21gr bottle - Super glue with precision nozzle for application. Ideal for natural rubber, metal, ceramics, wood, leather, cardboard and plastics (excl. PE, PP, PTFE)It is a multipurpose, anaerobic, cyanoacrylate super glue.Ultra-adhesive and extremely strong: Black Cyanoacrylate glues in only 10 to 15 seconds with continuous pressure of the 2 pieces.It withstands a temperature of about 150°C.Black Cyanoacrylate Glue has a strength of 180 kg/cm2.Thanks to the nozzle tip included in the bottle, Black cyanoacrylate glue is easy to use and applies without wasting a single drop.Black cyanoacrylate glue can be used in DIY, repair or construction work.It is ideal for use with leather, wood, ceramics, rubber, iron, metal and plastic (excl. PE, PP, PTFE) - Pressure bonding in 10-15 seconds.It is resistant to water, shock and vibration.The main advantage of having a black cyanoacrylate glue is to highlight the bonding spot making your work even more precise.You can easily clean the nozzle with acetone after using it.IT MUST BE KEEP AT THE ENVIRONMENTAL TEMPERATURE OF 16/17 degrees.Product safety: this item is subject to specific safety warnings and instructions.Caution: use under adult supervision Caution: contains fragrances that may cause allergies, Caution: use with protective equipment.
Fast-drying 21-gram FAST ultra liquid cyanoacrylate.Ultra liquid cyanoacrylate is a multipurpose anaerobic glue that does not dry out after opening and is valid for 12 months.Fast Glue ultra liquid is usable down to the last drop.Thanks to its nozzle, Fast Glue ultra liquid allows for precise, fast and effective gluing.Fast Glue is ideal for all your DIY, repair or construction jobs. Ideal for gluing leather, wood, ceramic, rubber, iron, metal and plastic (except PE, PP, PTFE). Quick-setting after pressing for 10-15 seconds.Resistant to water, shock and vibration.Quick Glue should be stored at room temperature.
Super Glue Gel Ideal for Vertical Surfaces - 20gr tube.Initial Drying: 10 to 90 seconds.Complete Drying: 24 hours.Does not run off vertical surfaces is not absorbed by porous surfacesthixotropic properties and high viscosity.Gel is ideal for bonding leather, metal, rubber, wood, ceramics, concrete, hard plastic, glass, plywood.DOES NOT PAST PE, PP and PTFE (Teflon)Shear strength: 3.5 MPa.Fills irregularities up to 0.25 mmResistant to temperatures from -55°C to 80°C.Density: 1.1 g/cm³.Instructions for use : Surfaces to be bonded must be clean, free of grease and dirt. Apply a thin, even layer of adhesive to a surface. The thinner the layer, the stronger the joint. Immediately stick the parts together, hold for a few seconds.
Super Slow-Drying Cyanoacrylate Glue - 21grAnaerobic cyanoacrylate for modeling and DIY Ideal for gluing rubber, metal, ceramics, wood, leather, cardboard and plastics (excl. PE, PP, PTFE).Ultra-adhesive and extremely strong glue: it dries in just 10/15 seconds with continuous pressure of the 2 parts.Resistant to a temperature of about 150 ° C and 180 kg / cm2.It is easy to use and applies precisely without wasting a single drop.It can be used in DIY, model making, nail repairing and rebuilding.It is resistant to 'water and vibration.You can easily clean the precision straw by dipping it in acetone after using it.MUST BE STORED AT AMBIENT TEMPERATURE, do not expose it to sunlight and do not store it in the refrigerator.Product safety: this item is subject to specific safety warnings and instructions not suitable for children without adult supervision. Caution: gives off vapors that may cause allergies.Caution: use with protective equipment, consult MSDS.
Dense Cyanoacrylate - 21grDense cyanoacrylate is a multi-purpose anaerobic glue that does not dry after opening, good for 12 months; every last drop can be used.Thanks to its tip, it allows precise, fast and efficient gluing.It is ideal for all your DIY, repair or construction work. Ideal for bonding leather, wood, ceramic, rubber, iron, metal and plastic (except PE, PP, PTFE), fast setting after pressing for 10-15 seconds. Resistant to water, shock and vibration.MUST BE KEEP AT AMBIENT TEMPERATURE.
Super Cyanoacrylate Glue - 21grSuper multipurpose, anaerobic, cyanoacrylate glue Ultra-adhesive and extremely strong:cyanoacrylate dries in just 10 to 15 seconds, is resistant to a temperature of about 150°C with a strength of 180 kg /cm2. Thanks to the nozzle tip, it is easy to use and apply without wasting a single drop. It can be used in your DIY, repair or construction work. Ideal for use with leather, wood, ceramic, rubber, iron, metal and plastic (excl. PE, PP, PTFE). Fast drying in 10-15 seconds.Resistant to water, shock and vibration. Bottles are supplied with a precision micro-drop tip nozzle. Application is easy thanks to the precision nozzle and pressure bottle, which always ensures proper bonding. You can easily clean the nozzle with acetone. SHOULD BE KEPT AT ROOM TEMPERATURE. NB: This item is subject to specific safety warnings and instructionsCaution: use under adult supervision Caution: evaporates fumes that may cause allergies Caution: use with protective equipment.
200ml Cyanoacrylate Glue Activator - To Accelerate GluingAccelerates the drying and bonding of cyanoacrylate glueSuper glue activator can be applied in two different ways:1) Before gluing the pieces, apply the activator to one of the two parts you want to glue then apply the activator to the other part, quickly join the two surfaces and wait for the glue to dry in a few moments.2) After gluing: apply the activator to one of the two parts you want to glue, join the surfaces, then spray the activator on the joint and wait for the glue to dry, doing this will speed up the gluing time (you can repeat the operation several times to better glue and strengthen the part in question).The activator is transparent and does not leave marks on the treated surface, is not aggressive with paints and does not leave many odors, but it is advisable to use it in a ventilated room.For an even result spray 30 cm from the surface.The activator can be applied thanks to its sprayer included in the 200ml can.
Gel Cianoacrilato da 28,3 grammi (1 oncia) cpn tubo antigoccia Adesivo e sigillante multi uso, La ZAP più densa di tutte. Funziona dove servono riempimenti speciali Consigliato per: Metallo, Legno, Gomma, Materie Plastiche, Alluminio, Ceramica, Prodotti Zap e Super Glue
CIANOACRILATO Denso e forte per incollaggi robusti. 1 oz. (28.3 gram) Slo-Zap CA Denso e forte per incollaggi robusti. Perfetto per laminare e fare raccordi. 30 secondi per posizionare le parti. Incolla in 60 secondi. Consigliato per: Metallo, Legno, Gomma, Materie Plastiche, Alluminio, Laminati, PT-20 (1 oz / 28.4 gr) PT-33 (2 oz / 55.7 gr) Per fare raccordi
CIANOACRILATO 20 grammi (0.7 ounces) Zap-O Foam Safe CA (Etichetta viola) Viscosità media Inodore "antilacrima", Adtto per ogni hobby. Incolla in 15 secondi. Consigliato per: Metallo, Legno, Gomma, Materie Plastiche, Alluminio, Ceramica, Prodotti Zap e Super Glue, Espanso
CIANOACRILATO 1/2 oz. (14.1 gram) Zap-A-Gap CA+ Riempie le fessure. 7-10 secondi per posizionare le parti. Indurisce in 20 secondi. Accelerabile con KICKER. Incolla tutto, anche le superfici grasse! Consigliato per: Metallo, Legno, Gomma, Vasellame, Materie Plastiche, Alluminio, Ceramica
AUPWE FLUIDO 1/2 oz. (14.1 gram) Zap CA Super fluido, penetra nel materiale, Adattto per molti materiali, specie il balsa.. Rinforza il tessuto del vetroresina, Incolla in 1-5 secondi. Consigliato per: Metallo, Legno, Gomma, Vasellame, Materie Plastiche, Alluminio, Ceramica, Porcellana, Tessuti, Vetroresina
ACCELERATORE per CIANOACRILATO 2 oz. (56.7 gram) Zip Kicker - Aerosol Spray Penetra negli spaazi ristretti. La versione aerosol è compatibile con I prodotti ZAP e con tutti le altre marche di CA Consigliato per: Prodotti Zap e Super Glue
Attivatore AC21 AC21 è un accelerante, progettato in abbinamento a Colla 21, per velocizzare la polimerizzazione degli adesivi a base cianoacrilato. Può essere utilizzato sia come preparazione delle superfici, sia dopo l'incollaggio come acceleratore. Ideale per la finitura/lucidatura di materiali porosi come il legno. NESSUN EFFETTO BLOOMING
colla cianoacrilica BLACK WIDOW 20gr. *** discontinued Speciale cianoacrilato 380 formulato con particelle di gomma per aggiungere flessibilità alle articolazioni. Extra forte, a bassa viscosità, con una formulazione speciale per metalli, gomma e plastica. Le superfici da unire devono essere prive di sporco, polvere e grasso. Dovrebbe essere applicata una piccola quantità di adesivo, più cianoacrilato non garantisce un migliore legame e rende più difficile l'asciugatura dell'adesivo efficace per l'incollaggio. - Cianoacrilato di etile con particelle di gomma all'1% - Utilizzare la temperatura: da -50º a 100º - Tempo di presa: da 60 a 120 secondi. Gli spazi vuoti e la superficie irregolare possono aumentare questo tempo di impostazione. Non è necessario utilizzare morsetti. Tenere saldamente i pezzi per 60 a 80 secondi garantirà una migliore adesione - Tempo di asciugatura definitivo: 24 h - Capacità di riempimento del gap: 0,15 mm - Viscosità: 100 mPa.S - Resistenza al taglio: 26,0 MPa
Roket Rapid Roket cyano range Highest quality cyanoacrylate adhesives. Roket Rapid: Medium viscosity, fast setting adhesive; sets 5-10 sec. Designed for use with precise Micro Tip anti-clog applicator (AC9). Colla cianoacrilica a media densità. Tempi di incollaggio da 5 a 10 sec
Roket Max Roket cyano range Highest quality cyanoacrylate adhesives. Roket Max: Thick, maximum gap-filling adhesive; sets 10-20 sec. Designed for use with precise Micro Tip anti-clog applicator (AC9). Colla cianoacrilica a media densità. Tempi di incollaggio da 10 a 20 sec