World War II IJN aircraft carrier deck in 1/48 scale - for Eduard kits.Display size 397x257 mmplastic parts: Eduardmarking options: nonedecals: noPE parts: nopaint mask: noresin parts: no
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartPSP Display - 1/72 scale perforated steel plates - for Eduard kits.plastic parts: Eduardmarking options: nonedecals: noPE parts: nopaint mask: noresin parts: no
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartMarston mat - World War II American landing mat in 1/48 scale - ICM model.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart1/35 Scale Anti-Tank Obstacles - ICM Model.Concrete anti-tank obstacles, also known as "Dragon's Teeth," were first used during World War II. They are believed to have been invented in Finland as a means of defense against the Red Army's armored vehicles. The purpose of these obstacles was not only to stop tanks and other armored vehicles, but also to direct their movements to areas where they could be targeted by enemy fire. This type of obstacle was widely used by all participants in the conflict, including neutral countries. For example, Switzerland also used similar obstacles, calling them Toblerone fortifications because of their resemblance to the shape of the famous chocolate bars."Dragon's Teeth" are still used today as fortification-type engineering obstacles. They are usually made of concrete and have a tetrahedral shape, sometimes with the top corner cut off. A large number of such obstacles have been installed in Ukraine, both in areas where combat operations take place and in other regions of the country, as a protective measure in potentially dangerous areas.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartDiorama Marston Mat WWII US Landing Mat 1/72 scale - ICM model.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartPSP 1/48 scale display - for Eduard kits.Display size 220x157 mmplastic parts: Eduardmarking options: nonedecals: noPE parts: nopaint mask: noresin parts: no
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWet Snow - 40mlComponent of the WINTERIZER set containing all the products needed to recreate the texture of snow on any surface, including terrain, vehicles and buildings.Wet Snow is a fine, semi-transparent powder with a grayish hue that simulates melting snow. It can be used in any scale from 1/16 to 1/72, giving your models, small scenes and dioramas a highly realistic effect, much like real snow. This product should be mixed in an 80/20 ratio with Snow Blinder and a few drops of Glossy Varnish. The resulting mixture should be applied with a brush and can be thinned with water to make it more fluid. The brushes used can be easily cleaned with water.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartPowder Snow - 60mlComponent of the WINTERIZER set containing all the products needed to recreate the texture of snow on any surface, including terrain, vehicles and buildings.Powder Snow is a fine, white powder perfect for simulating pure, freshly fallen snow. It can be used in any scale from 1/16 to 1/72, giving your models, small scenes and dioramas a highly realistic effect, just like real snow. This product should be mixed in equal parts with Snow Blinder and a few drops of Glossy Varnish. The resulting mixture should be applied with a brush and can be thinned with water to make it more fluid. The mixture dries in 12 hours. Brushes can be cleaned with water.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartAllied airfield with PSP cover 300x400mm Display size 300x400mmplastic parts: Eduardmarking options: nonedecals: noPE parts: nopaint mask: noresin parts: no
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartPSP Airfield WWII 1/72 scale - Hobby Weapon Model.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartUkraine Vasylkiv Air Base Taxiway - Acrylic 3 mm (410 x 270 mm) (410 g) 1/48 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartPit-F1 Pitstop Type 1 Base - Acrylic 3 mm (180 x 357 mm) (210 g) 1/20 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1944 Deck - Base - Acrylic 3 mm (240 x 240 mm) (190g) 1/72 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1944 Front Lift - Base - Acrylic 3 mm (240 x 240 mm) (190 g) 1/72 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1944 - Acrylic 3 mm (410 x 270 mm) (410 g) 1/48 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1943 Deck - Base - Acrylic 3 mm (240 x 240 mm) (190g) 1/72 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1943 Front Lift - Base - Acrylic 3 mm (240 x 240 mm) (190 g) 1/72 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartIJN Zuikaku 1943 - Acrylic 3 mm (410 x 270 mm) (410 g) 1/48 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartF1 Starting position base - 3 mm acrylic (180 x 357 mm) (210 g) 1/20 - Kelik.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart