Photoetched USS Wasp LHD-1 part 3 in 1/350 scale for Trumpeter kits.1/350 scale metal photoetched plate for ships, to enhance and detail the exterior of the model.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photoetched Panzerkampfwagen I Ausf. B in 1/35 scale for Tamiya kits.Photoetched metal plate in 1/35 scale for military vehicles to enhance and detail the exterior of the model.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Brassin set - engine for P-40E in 1/48 scale. Casings included. Made by direct 3D printing Recommended kit: Eduard Set contains: 3D printing: 45 parts decals: no photoetched details: no painting mask: no
1/48 scale P-40E TFace masking sheet for Eduard.Pre-cut, adhesive masking sheet in 1/48 scale for masking transparent parts, leaving free frames that will then be painted the required color for the model in question.Instructions are included.
1/48 scale P-40E masking sheet for Eduard.Pre-cut, adhesive masking sheet in 1/48 scale for masking transparent parts, leaving free frames that will then be painted the required color for the model in question.Instructions are included.
1/48 scale 3D P-40E SPACE decals for Eduard kits.Set of 1/48 scale 3D aircraft decals for instruments and main and side control panels, plus photo-etched steel and seatbelt details.Easy to apply.For proper use:1. For decals use Fabric Softener + fixative2. For photoetching use cyanoacrylate glue or two-component glueInstructions are included.
Photoetched 1/48 scale P-40E STEEL seat belts for Eduard kits.1/48 scale photoetched metal plate to enhance and detail cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be pre-colored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photoetched 1/48 scale P-40E landing flaps for Eduard kits.1/48 scale photoetched metal plate for enhancing and detailing cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads, and other small details.Some details may already be pre-colored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Brassin set - main wheel compartments for P-40E in 1/48 scale. Made by direct 3D printing. Recommended kit: EduardSet contains:3D printing: 2 partsdecals: nophotoetched details: nopaint mask: no
Brassin set - MG 15 machine gun magazines and case retainers in 1/72 scale.The set consists of 10 magazines and 10 case retainers (2 types, 5+5 pieces). Made by direct 3D printing. Easy to assemble, replaces plastic parts. Set contains: 3D printing: 20 parts decals: no photoetched details: no painting mask: no
LööK set - Brassin pre-painted dashboard and seat belts in STEEL for Bf 109G-6 in 1/72 scale. Easy to assemble, replaces the plastic part. Recommended kit: Tamiya Set contains: resin: 1 part decals: no photoetched details: yes, pre-painted painting mask: no
Brassin set - engine for Bf 109 G-10 produced by Erla factory in Leipzig in 1/72 scale. Hoods included. Made by direct 3D printing. Recommended kit: Eduard Set contains: 3D printing: 26 parts decals: no photoetched details: yes painting mask: no
Bf 109F-4 TFace 1/35 masking sheet for Hasegawa and Hobby 2000 kits.Carved 1/35 scale masking sheet for masking transparent parts, leaving free frames that will then be painted the color required for the model in question.
Photoetched 1/35 scale Bf 109F-4 for Hasegawa and Hobby 2000 kits.Photoetched 1/35 scale metal plate for enhancing and detailing the model's cockpit interior and exterior.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be precolored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Bf 109F-4 1/35 masking sheet for Hasegawa and Hobby 2000 kits.Carved 1/35 scale masking sheet for masking transparent parts, leaving free frames that will then be painted the color required for the model in question.
Set of 1/35 scale Bf 109F-4 SPACE decals for Hasegawa and Hobby 2000 kits.Set of 1/35 scale 3D helicopter decals for instruments and main and side control panels, plus photo-etched steel and seatbelt details.Easy to apply.For proper use:1. For decals use Fabric Softener + fixative2. For photoetching use cyanoacrylate glue or two-component glueInstructions are included.
Photoetched 1/32 scale Bf 109F-4 for Hasegawa and Hobby 2000 kits.Photoetched 1/32 scale metal plate for enhancing and detailing the model's cockpit interior and exterior.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be precolored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photoetched Bf 109F-2/4 1/32 scale exterior for HKM kits.Photoetched 1/32 scale metal plate for enhancing and detailing the cockpit interior and exterior of the model.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be pre-colored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photoetched Bf 109F-2/4 STEEL seat belts 1/32 scale for Hasegawa and Hobby 2000 kits.Photoetched 1/32 scale metal plate for enhancing and detailing the model's cockpit interior and exterior.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be precolored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Bf 109F-2 TFace 1/35 masking sheet for Hasegawa and Hobby 2000 kits.Carved 1/35 scale masking sheet for masking transparent parts, leaving free frames that will then be painted the color required for the model in question.
Photoetched 1/35 scale Bf 109F-2 for Hasegawa and Hobby 2000 kits.Photoetched 1/35 scale metal plate for enhancing and detailing the model's cockpit interior and exterior.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be precolored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Bf 109F-2 1/35 masking sheet for Hasegawa and Hobby 2000 kits.Carved 1/35 scale masking sheet for masking transparent parts, leaving free frames that will then be painted the color required for the model in question.
Set of 1/35 scale Bf 109F-2 SPACE decals for Hasegawa and Hobby 2000 kits.Set of 1/35 scale 3D helicopter decals for instruments and main and side control panels, plus photo-etched steel and seatbelt details.Easy to apply.For proper use:1. For decals use Fabric Softener + fixative2. For photoetching use cyanoacrylate glue or two-component glueInstructions are included.
Photoetched 1/32 scale Bf 109F-2 for Hasegawa and Hobby 2000 kits.Photoetched 1/32 scale metal plate for enhancing and detailing the model's cockpit interior and exterior.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be precolored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
1/48 scale Bf 109E-3 TFace masking sheet for Hobby Boss.Pre-cut, adhesive masking sheet in 1/48 scale for masking the transparent parts, leaving the frames clear which will then be painted the required color for the model in question.Instructions are included.
1/48 scale Bf 109E-3 masking sheet for Hobby Boss.Pre-cut, adhesive masking sheet in 1/48 scale for masking the transparent parts, leaving the frames clear which will then be painted the required color for the model in question.Instructions are included.
1/48 scale Bf 109E-3 photoetched Bf 109E-3 for Hobby Boss kits.1/48 scale metal photoetched plate for enhancement and detailing.Usually contains details for:instrument panel, seat belts, side bulkheads, and other small details.Some details may already be pre-colored.For proper use:Iglue with cyanoacrylate glue or two-component glue.Instructions are included.
Bf 109E-3 SPACE 1/48 scale 3D decals for Hobby Boss kits.Set of 1/48 scale 3D aircraft decals for instruments and main and side control panels, plus photo-etched steel and seatbelt details.Easy to apply.For proper use:1. For decals use Fabric Softener + fixative2. For photoetching use cyanoacrylate glue or two-component glueInstructions are included.
Photoetched Bf 109E-3 1/48 scale STEEL seat belts for Hobby Boss kits.1/48 scale photoetched metal plate to enhance and detail cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be pre-colored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photoetched Bf 109E-3 1/48 scale Bf 109E-3 for Hobby Boss kits.1/48 scale metal photoetched plate for enhancing and detailing cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads, and other small details.Some details may already be pre-colored.For proper use:Iglue with cyanoacrylate glue or two-component glue.Instructions are included.
Bf 109E TFace 1/35 masking sheet for Eduard kit.Carved 1/35 scale masking sheet to mask the transparent parts, leaving the frames free which will then be painted the required color for the model in question.
Photoetched 2 cm Flak 38 1/35 scale metal plate for ICM kits.Photoetched 1/35 scale metal plate for military vehicles to enhance and detail the exterior of the model.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
F-86F-25/30 TFace masking sheet in 1/48 scale for Airfix.Pre-cut, adhesive masking sheet in 1/48 scale for masking transparent parts, leaving free frames that will then be painted the required color for the model in question.Instructions are included.
1/48 scale F-86F-25/30 masking sheet for Airfix.Pre-cut and adhesive 1/48 scale masking sheet for masking the transparent parts, leaving the frames clear which will then be painted the required color for the model in question.Instructions are included.
Photo etchings 1/48 scale F-86F-25/30 model for Airfix kits.1/48 scale metal photoetched plate for enhancement and detailing.Usually contains details for:instrument panel, seat belts, side bulkheads, and other small details.Some details may already be pre-colored.For proper use:Iglue with cyanoacrylate glue or two-component glue.Instructions are included.
F-86F-25/30 SPACE 1/48-scale 3D decals for Airfix kits.Set of 1/48-scale 3D aircraft decals for instruments and main and side control panels, plus photo-etched steel and seatbelt details.Easy to apply.For proper use:1. For decals use Fabric Softener + fixative2. For photoetching use cyanoacrylate glue or two-component glueInstructions are included.
Photoetched 1/48 scale F-86F-25/30 STEEL seat belts for Airfix kits.1/48 scale metal photoetched plate for enhancing and detailing cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads and other small details.Some details may already be pre-colored.For proper use:Glue with cyanoacrylate glue or two-component glue.Instructions are included.
Photo etchings 1/48 scale F-86F-25/30 model for Airfix kits.1/48 scale metal photoetched plate for enhancing and detailing cockpit interiors.Usually contains details for:instrument panel, seat belts, side bulkheads, and other small details.Some details may already be pre-colored.For proper use:Iglue with cyanoacrylate glue or two-component glue.Instructions are included.
Brassin set Curtiss P-40E Warhawk fishtail exhaust tubes with cross-tread tires and tailwheel in 1/48 scale.Easy to assemble, replaces plastic parts The set contains:--3D molded parts: 14 parts-decals: no-photoetched details: no-paint mask: no
Brassin set Rounded exhaust chimneys of the Curtiss P-40E Warhawk with cross-tread tires and tail wheel in 1/48 scale.Easy to assemble, replaces plastic parts Set contains:-3D-molded: 14 parts-decals: no-photoetched details: no-paint mask: no
Messerschmitt Bf-109G-10 WNF/Diana aircraft kit in 1/72 scale - Eduard model. The Messerschmitt Bf 109G-10 WNF/Diana is an advanced version of the famous German Luftwaffe fighter of World War II, the Messerschmitt Bf 109. The G-10 model, produced in 1944-45, represents one of the most powerful and improved variants of the B The term WNF stands forWernher von Braun Werke , a plantDianais a reference to The Bf 109G-10 had several distinctive features, tr Daimler-Benz DB 605D engine : A more Structural changes: The G-10 saw Armament: The fighter was Reinforced structure : The Overall, the Bf 109G-10 was one of the fastest and deadliest aircraft in service toward the end of the war, but unfortunately it came into full production in the last months of the conflict, so it did not have a decisive impact on wartime events. The Diana probably refers to a specific version equipped with some improvements to further increase combat effectiveness.
Focke-Wulf Fw-190A-3 aircraft kit in 1/48 scale - Model Eduard Weekend Edition. The Focke-Wulf Fw 190A-3 is one of the most famous and respected variants of the German Focke-Wulf Fw 190 fighter aircraft, used by the Luftwaffe during World War II. The A-3 version, produced in 1942, was one of the first to enter production and was a significant improvement over earlier models. Here are some of the main features of the Fw 190A-3 : Engine : The Fw 190A-3 was fitted with a radial engine. BMW 801D-2 of 1,700 horsepower, giving the plane considerable power and superior performance in terms of speed and maneuverability. This engine enabled it to reach a top speed of about 640 km/h. Armament : The A-3 version was armed with a combination of machine guns and cannons, consisting of: 2 MG 151/20 20 mm cannons mounted in the wings. 2 MG 17 7.92-mm machine guns installed in the nose, above the engine. This armament makes it particularly powerful against enemy aircraft and ground targets. Structure and design : The Fw 190A-3 had a strong fuselage and wing arrangement that gave it excellent maneuvering capabilities, especially during low-altitude combat. The plane was known for its excellent maneuverability and resistance to damage, which made it difficult to shoot down. Flight characteristics : One of the main qualities of the Fw 190A-3 was its ability to fight effectively at both high and low altitudes. Its radial engine, compared with the in-line engines of Allied fighters, gave it excellent resistance to high temperatures, making it more reliable in battle. Role : The Fw 190A-3 was primarily an interceptor and ground attack fighter. Its performance enabled it to successfully take on Allied fighters, such as the Supermarine Spitfire, and also to participate in attacks against ground targets, such as tanks and supply lines. In the context of World War II, the Fw 190A-3 proved a fearsome opponent for the Allies and contributed significantly to air battles, especially in the skies over Germany and in defense campaigns during 1942-43.
Brassin set Curtiss P-40E Warhawk main wheels with cross tread tires and tailwheel in 1/48 scale.Easy to assemble, replaces plastic parts Set contains:-resin: 4 parts-3D parts: 2 parts-decals: no-photoetched details: yes-painting mask: yes
Collection of 3 sets for P-51D-15+ in 1/72 scale.Recommended kit: Eduard- cockpit- propeller- wing gun housingsAll sets included in this BIG SIN are available separately, but with each BIG SIN set you save money.