M5 and M8 (Type 2) 1/48 scalebrush cutters for Tamiya kits - Set CMKIn the days following the June 1944 invasion, the Normandy countryside proved difficult for tanks to cross because of the thick bushes separating the fields, known as the "Bocage." In the field workshops, American and some British tanks were therefore equipped with brush cutters that allowed them to cross. These brush cutters were made and welded from the most readily available materials, German anti-tank obstacles and Czech-made so-called "hedgehogs" in different variations. We prepared a 3D-printed brushcutter for the Tamiya M5 Stuart and M8 Howitzer kits, since these brushcutters are missing from the Tamiya kit components.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWelded M5 and M8 1/48 scaleroad wheels for Tamiya kits - Set CMKDetailed rims with holes for M5 Stuart and M8 Howitzer made by Tamiya, offering only complete wheels.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartM5 and M8 1/48-scalefront headlight and periscope guard s for Tamiya kits - Set CMKM5 Stuart tanks or M8 self-propelled howitzers based on the same chassis often had their periscopes protected by welded bar guards. And since it is almost impossible to obtain such protectors in injected styrene and the etched ones are not entirely aesthetically pleasing, we now have for you some 3D printed ones that can be used on your Tamiya kit.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWorld War II British tank smoke grenade launchers in 1/48 scale - Set CMKBritish smoke grenade launchers, with a rather distinctive shape, are now reproduced using a 3D printer. These launchers were used on British tanks and many other vehicles.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWorld War II British tank commander (1 half-figure / 3D printed) in 1/48 scale - CMK model.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWheels/hubs without tires A-20 Havoc/Boston/ P-70 Nighthawk 1/72 scale / for Special Hobby kits.Cast resin rims with 3D-molded splined hubs. Cross pattern tires.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartM5 and M8 (Type 1) hedge trimmers for 1/48-scale Tamiya kits - Set CMKIn the days following the June 1944 invasion, the Norman countryside proved difficult for tanks to cross because of the thick bushes separating the fields, known as the "Bocage." In the field workshops, American and some British tanks were therefore equipped with brush cutters that allowed them to cross. These brush cutters were made and welded from the most readily available materials, German anti-tank obstacles and Czech-made so-called "hedgehogs" in different variations. We prepared this type of 3D printed brushcutter for the Tamiya M5 Stuart and M8 Howitzer kits, as they are missing in the components of the Tamiya kits.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWorld War II British Ammunition Boxes 1/48 Scale - Set CMKThese British ammunition boxes were often used by crews of tanks and other military vehicles to stow not only ammunition, but also personal effects and more. The crates were usually placed anywhere on the vehicle that was suitable.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartSabre Dog F-86K 1/48-scale Sabre wheels for Special Hobby kit 48123 - CMK detail set.These new resin wheels were designed for kit No. SH48123 and also offer 3D printed wheel hubs. In addition, the tires are weighted and feature pretty details.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartDornier Do 217 wheel correction set in 1/48 scale for ICM kit - CMK detail set.Cast resin wheels with good levels of detail directly replace the rather shoddy ones in the otherwise rather nice ICM kit of the Dornier Do 217.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartMosquito Landing Gear Legs 1/72 Scale for Special Hobby Kits - CMK Set.3D printed landing gear legs, made of a sturdy material, for Special Hobby's Mosquito kits. These legs not only offer fine detail, but also simplify construction.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartLysander Mk.II (Perseus Engine) 1/48 scale conversion set for Airfix kits - CMK detail set.The Lysander Mk.I/III were powered by variants of the Bristol Mercury engine, but the Lysander Mk.II version mounted the Bristol Perseus radial engine. This engine also featured a different cowling. All of this, along with decals, is offered in our 3D printed set. The decals depict three RAF aircraft active in ??Europe, the British Isles and one from the Canadian RCAF.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartF-111A 1/72 scale open electronic boxes F-111A for Italeri kit - CMK detail set.Detailed castings of the open electronic boxes on the left side of the bow and rear of the fuselage. For Italeri's F-111E kit.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartF-111A 1/72 scale cockpit for Italeri kit - CMK detail set.Detailed cockpit for Italeri's F-111E kit. With additional photoetched parts.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartA-20 Havoc/Boston/ P-70 Nighthawk 1/72 scale wheels for Special Hobby kits - CMK detail set.Precision resin wheels with molded hubs for Special Hobby's A-20 Boston/Havoc/P-70 Nighthawk kits.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart1/35 scale M60 machine gun - CMK set.Set of two detailed 3D printed American M60 machine guns for the Kriegsfischkutter (Special Navy line). Set includes ammunition belts and magazines.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartKriegsfischkutter Twin 20 mm C/30 FLAK without Shield in 1/72 scale.3D printed twin-barrel 20 mm cannon, designed as an alternative armament for the Kriegsfischkutter (Navy special line). The barrels are made of milled metal.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartWartime fishing cutter Life raft / Life raft 1/72 scale.Set of life raft, paddles and lifebuoy for the Kriegsfischkutter (Special Navy line). The set is 3D printed.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartTwo seats for F-16D in 1/48 scale - Set CMK.Detailed molded seat for Kinetic's two-seater F-16.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartF-16C 1/48-scale seat - CMK set.Detailed molded seat for Kinetic's single-seat F-16.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart1/72 Scale F-84F Thunderstreak Seat - CMK Set.3D printed ejection seat for Special Hobby's F-84F Thunderstreak model kits.Offers an extreme level of detail.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cartM60D with Sagami mount (2 pieces) for 1/35 scale UH-1B Huey for Trumpeter kit - CMK Set.3D printed set with a pair of M60D machine guns on the Sagami mount in the open cabin doors of the UH-1 Huey helicopter. These armed UH-1s were employed during the Vietnam War.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart1/72 scale F-16 seat - CMK set.3D printed seat designed for Tamiya's F-16 kits.
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart1/72 scale F-15D/DJ/E/I seats for Academy kits - CMK set.A pair of 3D printed seats for the two-seat versions of the F-15 Eagle jet .
The item has been added to your cart
Go to cartYou have reached the maximum quantity that can be added to the cart
Go to cart